GM 1170/1370/1470/1590/1790/2090
Feature:
Extra Loading & High Precision
High frequency induction treatment on slide ways, the hardened depth is 2 mm, the hardness is HRC55.
The contact sliding surfaces are coated with Turcite-B and Fine-Scraped
Absolute Rigidity & Best Solution
Absolute rigidity and to keep motion control’s the machine base with four slide ways is the best technical solution.
High frequency induction treatment on slide ways, the hardened depth is 2 mm, the hardness is HRC55.
The contact sliding surfaces are coated with Turcite-B and Fine-Scraped
Absolute Rigidity & Best Solution
Absolute rigidity and to keep motion control’s the machine base with four slide ways is the best technical solution.
Specification
| MODEL | UNT | 1170 | 1370 | 1470 |
|---|---|---|---|---|
| Table | ||||
| Table Size | mm | 1300×700 | 1500×700 | 1600×700 |
| T-Slot | mm | 18x125x5 | 18x125x5 | 18x125x5 |
| Max Table Load | kgs | 1000 | 1200 | 1500 |
| Travel | ||||
| X/Y/Z Axis Travel | mm | 1100/710/600 | 1300/710/600 | 1400/710/600 |
| Spindle nose to table surface | mm | 100-710 | 100-710 | 100-710 |
| Spindle | ||||
| Spindle Taper | ISO 50 (ISO 40 For Belt Type) | |||
| Spindle Speed | rpm | 6000 (8000) Low Speed 40~1750, High Speed 1751~8000 | ||
| Transmission Method | Gear (Belt) | |||
| Spindle Motor | kw | 7.5/11 (11/15) | ||
| A.T.C | ||||
| Magazine Capacity | tools | 20 (24,32) | ||
| Tool Selection Method | Random | |||
| Max Tool Diameter / W/O Adjacent | mm | ISO 40: Ø75/Ø150 | ||
| Max Tool Weight / Length | kgs/mm | ISO 40: 7/300 | ||
| Tool Change Time | sec | ISO 40: T-T 2.5, C-C5 | ||
| 3 Axis Traverse | ||||
| 3 Axis Cutting Feedrate | mm/min | 10000 | ||
| 3 Axis Rapid Traverse | m/min | 20/20/16 | ||
| Coolant | ||||
| Coolant Tank Capacity | L | 350 | ||
| Coolant Flow | hp | 50 | ||
| General | ||||
| Air Pressure Requirement | kg/cm² | 5~6 | ||
| Power Requirement | (KVA) | 30 | ||
| Machine Size (LxWxH) | mm | 3320x2865x2980 | 3560x2865x2980 | 3960x2865x2980 |
| Machine Weight | kgs | 9000 | 10000 | 11000 |
| MODEL | UNT | 1590 | 1790 | 2090 |
|---|---|---|---|---|
| Table | ||||
| Table Size | mm | 1700×850 | 2000×850 | 2200×850 |
| T-Slot | mm | 18x125x5 | 18x125x5 | 18x125x5 |
| Max Table Load | kgs | 2000 | 2500 | 3000 |
| Travel | ||||
| X/Y/Z Axis Travel | mm | 1500/900/850 | 1700/900/850 | 2000/900/850 |
| Spindle nose to table surface | mm | 150-1000 | 150-1000 | 150-1000 |
| Spindle | ||||
| Spindle Taper | ISO 50 | |||
| Spindle Speed | rpm | 6000 (8000) Low Speed 40~1750, High Speed 1751~8000 | ||
| Transmission Method | Gear (Belt) | |||
| Spindle Motor | kw | 11/15 (15/18.5) | ||
| A.T.C | ||||
| Magazine Capacity | tools | 20 (24,32) | ||
| Tool Selection Method | Random | |||
| Max Tool Diameter / W/O Adjacent | mm | ISO 50: Ø100/Ø200 | ||
| Max Tool Weight / Length | kgs/mm | ISO 50: 15/350 | ||
| Tool Change Time | sec | ISO 50: T-T 3.5, C-C 7 | ||
| 3 Axis Traverse | ||||
| 3 Axis Cutting Feedrate | mm/min | 80000 | ||
| 3 Axis Rapid Traverse | m/min | 16/16/12 | ||
| Coolant | ||||
| Coolant Tank Capacity | L | 700 | ||
| Coolant Flow | hp | 70 | ||
| General | ||||
| Air Pressure Requirement | kg/cm² | 5~6 | ||
| Power Requirement | (KVA) | 40 | ||
| Machine Size (LxWxH) | mm | 4020x3330x3250 | 4520x3330x3250 | 5070x3330x3250 |
| Machine Weight | kgs | 14000 | 15000 | 16000 |
- We reserve the right to modify the design and specification without notice in advance.
Above specifications are for reference only. Correct specifications are based on actual machine.
Description in () are optional accessories.